Renegade Canada / Sprinter
CKC Sprinter equipment

Built for the flat-out sprint.

Canadian Kennel Club (CKC)

A timed 100-metre dash. Purebred or mixed breed, one dog at a time. Renegade builds the lure machines that run it, and ships them to anywhere in Canada.

On course — real runs, real machine
Since 20162,000+ machines deployed50+ countriesLures to 150 km/hEngineered in Australia
Sprinter in Canada

One lane. One dog. One clock.

Here is what the course looks like in Canada, and the Renegade system that runs it.

The course

CKC Sprinter

A timed 100-metre dash. Purebred or mixed breed, one dog at a time.

  • CourseA straight, essentially flat 100 m (328 ft)
  • Who runsAll purebred and mixed-breed dogs, 12 months and older, run singly
  • TimingTo a tenth of a second, by stopwatches or break-the-beam timers
  • SpeedKPH = 360 ÷ your time in seconds, then a height handicap
  • TitlesNS at 150 points, S at 500, AS at 1,000, SX at 1,500
  • LureA white plastic bag or a squawker, kept 3 to 7.6 m ahead of the dog
Your equipment

A loop, run out and back.

On a straight, a Renegade loop system runs the lure from start to finish, stops, then reverses to bring it back. The lure never passes a pulley or the machine.

  • The lure line runs down the middle of the lane
  • The return line, the pulleys and the machine all sit outside the lane
  • Reverse the line and the lure is back at the start for the next dog
What the rules sayThe CKC rules let a club use a drag or a continuous-loop system. With a loop, the return string has to be set outside the running course.

Rules summarised from the Canadian Kennel Club (CKC) rules, read in November 2026. Rules change: always check the current rule book before you set a course for a trial.

How it sets up

From bare grass to a sprint lane.

Scroll to set up a 100 m lane on a Renegade loop system, then send a dog down it.

Scroll to build it ↓
  1. Step 1

    Place the machine

    Set the machine past the end of the run-out, well clear of the finish line.

  2. Step 2

    Stake the pulleys

    3 pulleys, all outside the lane: one beside the machine and two behind the start.

  3. Step 3

    Run the line

    The lure line runs down the middle of the lane and the return line runs outside the fence: 300 m of line in all.

  4. Step 4

    Clip on the lure

    Clip the lure to the line at the start. The dog waits behind the start line.

  5. Step 5

    Release

    The lure runs from start to finish and stops short of the machine. Reverse the line and it is back at the start for the next dog.

That's the course.

This layout uses 3 pulleys and 300 m of line. The LS-600 ALPHA is the machine we build for club days.

See the kitGo to the shop
What you need

The kit for a sprint lane.

Add up your whole line, out and back, including the run-out. That total is what you match to a machine's course rating.

LS-600 ALPHA
For clubs and events

LS-600 ALPHA

A continuous-loop lure system for courses up to 600 m, with a lure speed of up to 75 km/h.

  • Loop courses up to 600 m
  • Runs up to 10 pulleys, with 4 in the box
  • 8 hours of running
  • Lure speed up to 75 km/h
  • 2 years commercial warranty
Full details →
LS-400 BETA
For practice lanes

LS-400 BETA

A continuous-loop lure system for courses up to 400 m, with a lure speed of up to 75 km/h.

  • Loop courses up to 400 m
  • Runs up to 6 pulleys, with 6 in the box
  • 3 hours of running
  • Lure speed up to 75 km/h
  • 1 year warranty
Full details →

Does your club run Sprinter on a drag line? The rules allow either system, and the DS-100 RAPTOR is our drag lure for that.

See it run

Real dogs, real lanes.

AhsokaTimed run down the sprint lane
PosyFlat out between the fences
Sprint laneSand lane, loop machine
Questions

Asked before you.

Which machine do I need for Sprinter?

For a club running events, the LS-600 ALPHA: it is rated for loop courses up to 600 m and runs for 8 hours. For a practice lane, the LS-400 BETA is rated up to 400 m. Count your whole line, out and back with the run-out, when you compare.

How does a loop system work on a straight?

The line is one continuous loop. The lure goes down the lane on one side of the loop and stops short of the machine. You reverse the line to bring it back to the start. The return line sits outside the lane.

Do the rules allow a loop system?

The CKC rules let a club use a drag or a continuous-loop system. With a loop, the return string has to be set outside the running course.

What's the difference between a loop system and a drag lure?

A loop system runs one continuous line round ground pulleys, so the lure travels the whole course and you can lay out turns. A drag lure reels the lure straight in towards the machine; you walk it back out for the next run. Loop systems suit clubs, events and anywhere several dogs run. Drag lures suit one to three dogs at home.

Do you deliver in Canada?

Yes. Built in Australia and shipped to your door anywhere in Canada. Flat-rate freight per order to Canada, shown before you pay.

What does it cost in tax and duty?

Prices are in Canadian dollars. Any duty or sales tax charged at the Canadian border is not included.

How do I pay?

By card at checkout (Apple Pay and Google Pay work too). If you'd rather pay by bank transfer, choose "pay by invoice" at checkout and we'll send one.

How long until it ships?

Each machine is built to order. The lead time is on every product page: 10 to 15 business days for some machines, 3 to 4 weeks for others. Shipping time is on top of that.

Renegade Dog Lures — Australia, since 2016

Tell us about your course. We'll size the system.

Tell us about your dogs, your ground and what you want to run. We'll come back with the right system and a written quote, with freight to your door.

We'll come back with the right system and a written quote, with freight to your door.

That didn't send. Please try again, or email info@renegadeactivedogs.com.

Got it — thanks!We'll be in touch soon with the right system and a quote.